Rega VT Adjuster and Speednut Set

A high quality set for adjusting Vertical Tracking Angle on Rega RB250 RB300 and RB600 type Tonearms. Also suits other makes of arm which are based on these models such as Audiomods, Michell and Origin Live, (Not suitable for the Origin Live Onyx).

The VTA Adjuster allows very fine adjustment of height and in combination with the Speed Nut allows this to be achieved quickly as there is no need for using a spanner as the nut simply needs a slight tightening “nip” with the fingers. (The minimum hole size required is 24 MM diameter).

Machined from high spec Aluminium Alloy to extremely tight tolerances with a knurled finger grip and stunning finish

This set is a bonus for suspended type turntables as the VTA Adjuster and Speed Nut weigh 7 grams less than the original Rega nut.

Compatible with all our Rega Armboards and Mounting Plates (non 3 point mounting) without modification but other types of Plates / Armboards may need the hole opening up slightly bigger to accommodate the VTA Adjuster. In my opinion this set is superior to any other on the market in terms of quality and ease of use and fitting.

When using with an RB250 arm please remove the plastic bush at the top of the arm threaded base to expose brass body to allow the arm to drop inside the VTA top collar.

Please note – Not ideal for the Rega Planar range of turntables or similar due to the thickness of the plinth so this set won’t allow much adjustment, for a set that is more suitable click here

The Rega nut be it the original or our Speed Nut should never be over tightened as you risk damaging the arm and is actually detrimental to sound quality. VTA Adjuster or Speed Nut can also be used separately on their own.